Boat Outfitting - Tools - Page 1 - Global Yacht Supply

Quick view

Weld Mount
|
sku: CW48823

Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25

Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a...

MSRP:

Now: $82.31
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW57664

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 500

AT-3B Small Black Nylon Wire Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...

MSRP:

Now: $253.81
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW57663

Weld Mount AT-3 Small White Nylon Tie Mount - Qty. 500

AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs...

MSRP:

Now: $253.81
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW57601

Weld Mount Adhesively Bonded Fastener Kit w/AT 8040 Adhesive

Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains:(1) Plano Storage Box - 11" x 7.25" x 2.75"(50) AT-5 Tie Mount (White)(1) AT-8040 Adhesive(5) AT-850 Mixing Tip(1) AT-300 Dispensing Gun(2) AT-113B Black Footmans Loop(4) ST125-1420-16...

MSRP:

Now: $253.81
Add to Cart Compare
Quick view

T-H Marine Supplies
|
sku: CW86259

T-H Marine Oetiker Stepless Clamp Kit w/Pliers

Oetiker Stepless Clamp Kit with PliersStepless™ 150-Piece Clamp Rigging Kit by T-H Marine®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product...

MSRP:

Now: $296.02
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW57665

Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500

AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for...

MSRP:

Now: $319.47
Add to Cart Compare
Quick view

GROCO
|
sku: CW75342

GROCO Thru-Hull Installation Tool

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer. Slide the thru-hull fitting, flanged end first, over the tool. (It will stop at the...

MSRP:

Now: $205.80
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW48874

Weld Mount AT-4020 Acrylic Adhesive - 10-Pack

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40...

MSRP:

Now: $382.19
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW48873

Weld Mount AT-2010 Acrylic Adhesive - 10-Pack

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops...

MSRP:

Now: $382.19
Add to Cart Compare
Quick view

Digital Yacht
|
sku: CW86234

Digital Yacht NAVDoctor NMEA Network Diagnostic Tool

NAVDoctor NMEA Network Diagnostic ToolNMEA 2000 networks are used extensively for interfacing marine electronic products. It’s based on a robust Canbusarchitecture, but one bad device, cable or termination can have a detrimental effect on performance...

MSRP:

Now: $489.95
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW57666

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...

MSRP:

Now: $319.47
Add to Cart Compare
Quick view

Weld Mount
|
sku: CW56269

Weld Mount AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50

AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50Weld Mount's AT-850 tip is for use only with the AT-8040. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features:Square Mixing Tip4" LongCase of...

MSRP:

Now: $92.11
Add to Cart Compare

Compare Selected

Shop by Category

Shop by Brand

Shop by Brand

Tools