Radar/TV Mounts

Seaview 4 Wedge f/10x10 Base

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features:Pre-drilled mounting holes allow for quick and easy...

Seaview IsoMat Mast Platform Adapter

IsoMat Mast Platform AdapterThis is an adapter for boats with Isomat masts (integral track at the front). This adapter is installed between the platform and the platform mounting feet, and allows the mounting feet to spread out wider. Manufacturer :...

Seaview 1- Light Bar f/24" SatDomes - Requires LTB Top

1-14" Light Bar for 24" Satdomes - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in...

Edson Vision Series Attwood LED 12V Combination Light w/72" Pigtail

Attwood LED 12V Combination Anchor/Streaming LightEdson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the...

Seaview Mast Mount f/FLIR M300 Series Fits Mast w/2-5/8" or Larger

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high...

Seaview RW4-5 Degree Wedge Mount f/Simrad TX06S & TX10S

RW4-5 Degree Wedge Mount for Simrad TX06S & TX10SImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Simple & Easy Installation...

Seaview PM5-FMD-8 Camera Mount f/FLIR MD Series & Raymarine T200

Camera MountGet the most out of your FLIR MD or Raymarine T200 camera with the Seaview PM5-FMD-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space...

Seaview 18" Modular Mount AFT Raked 10 x 10 Base Plate - f/Large Sat Domes - 18" Top Plate Required

PMA-1810-M2The 18" tall Seaview aft leaning mount for Satdomes (18"-24" diameter). The oval hollow mast section allows for easy cable management. The small 10"x10" foot print design is a great solution for limited space. This modular mount is light...

Seaview Stainless Steel Guard for 24" Radar Domes

Seaview Stainless Steel Guard for 20" to 24" Radar DomesA universal high polished stainless steel guard for all 24" Radar Domes.Works with Raymarine Quantum and Quantum2 Radars and Simrad Halo 24. Manufacturer : Seaview Manufacturer Part No : SM-G24-U...

Edson Vision Series 18" Dual Mount f/ Radars & Sat Domes

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features:All-new...

Scanstrut 6" PowerTower Polished Stainless Steel f/Garmin & Furuno Domes

A new marine grade polished stainless steel 6" PowerTower® for mounting all 2kW and 4kW radomes. Supplied with grommet and watertight base seal for simple installation, the SPT1001 and SPT1002 have all cables routed inside.The minimal footprint (6" x 6")...

Scanstrut SC29 Radar Guard f/M92722 f/Use In Combination w/Raymarine Quantum Radar

SC29 Radar Guard for M92722 for Use In Combination with Raymarine Quantum RadarPolished stainless steel guards protect radome from damage and reduce wear on the sails.Features:Mounted using radome bolts, no extra fastenings requiredEasy to fit – between...