Fuse Blocks & Fuses

BEP Pro Installer ANL Through Panel Fuse Holder - 500A

ANL Through Panel Fuse Holder, 500AThis innovative, through-panel mounting fuse holder (Patent Pending) offers the user easy visual inspection of fuse state, and easy/safe access to change fuses if blown. It provides high-capacity fusing, fast response,...

BEP Pro Installer Class T Fuse Holder w/2 Additional Studs - 400-600A

Class T Fuse Holder with 2 Additional Studs 400-600A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard...

BEP Pro Installer Class T Fuse Holder w/2 Additional Studs - 225-400A

Class T Fuse Holder with 2 Additional Studs 225-400A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard...

BEP Pro Installer ANL Fuse Holder w/2 Additional Studs - 750A

ANL Fuse Holder with 2 Additional Studs, 750AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power...

Blue Sea 5007100 Class T Fuse Block w/Insulating Cover - 110 to 200A

Class T Fuse Block with Insulating Cover - 110 to 200AAllows the use of Class T fuses for fast acting circuit protection of inverters and other electronicsFour stud design provides ample access around connecting stud to install large cable lugs without...

Blue Sea 7748 SafetyHub 150 Fuse Box

SafetyHub 150 Fuse BlockThe SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates upt to ten fused circuits. It can be used for Main or Branch...

Blue Sea 5502 Fuse Block Class T 225-400 Amp

Fuse Block Class T 225-400 AMPPart #: 5502Features:Maximum Voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb (21.47 Nm) max. Terminal Stud Size: 3/8"-16 (M10) Mounting Holes: Accept 1/4" (M6) Screw Maximum Cable Size 4/0...

Victron Busbar to Connect 6 Modular Holders

Busbar to Connect 6 Modular HoldersFeatures:Six position high current bus bar (1500 A)With two M10 input connections.Input current up to 2000 A.Recommended to parallel multiple high power Multi or Quattro inverter/chargersWarranty InfoWARNING: This...

Victron Lynx Distributor

Lynx DistributorA modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.  Contains a positive and negative bus-bar...

Victron Lynx Power-In

Lynx Power-InThe lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an...

Victron Lynx Shunt VE. Can

Lynx Shunt VE. Can The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery.  The Lynx shunt contains a positive bus-bar with space...

Sea-Dog Blade Style LED Indicator Fuse Block w/Negative Bus Bar - 12 Circuit

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 CircuitNickel Plated Copper/Stainless Steel/Injection Molded ABS.Features:Red LED lights indicate when fuse is blown or missingUses ATO/ATC & ATM fuses 1A-30AMain line terminal rating is...